Elite CSW200UL Specifications download pdf (Page 6)

ROLE OF END USERS/HOME OWNER

SWING GATE SYSTEMS

Contact a trained gate systems technician to maintain and repair the gate system. (End users

should never attempt to repair the gate)

Retain and utilize the installation and maintenance manual and safety instructions.

Routinely check all gate operator functions and gate movement.

Discontinue use if safety systems operate improperly, the gate is damaged, or the gate is difficult

to move.

Never over tighten the operator clutch on load sensing device to compensate for a damaged or stiff

operating gate.

Prominently display and maintain warning signs on both sides of the gate.

Keep all obstructions clear of the vicinity of the path of the gate system.

Actively discourage pedestrian use of the vehicular gate operating system.

Prevent anyone from playing near any part of the gate system.

Never allow anyone to climb under, over or through a gate or the adjacent fence area.

Never allow children to operate gate

Keep portable controls out of reach of children.

Never allow anyone to install an operating control within reach of the gate.

Always be certain the gate area is clear of pedestrians before operating the gate.

End users should be made aware that they must:

Entrapment Zone Hazard - Body parts may become entrapped between a gate and a stationary

object when the gate begins to move, which can result in serious injury or death. Pedestrians must

stay clear of the gate path, and any area where gate motion is close to stationary objects.

Pinch Points Hazard - The opening mechanism may have arms that can overlap with a scissoring

effect, which can result in serious injury. Pedestrians must stay clear of the opening mechanism at

all times, particularly when gate is opening.

Be sure that warning signs are prominently displayed on both sides of the gate and any other place

where danger exists.

•

CSW200A Manual.qxd 12/9/04 3:11 PM Page 5

1 2 3 4 5 6 7 8 9 10 11 ... 53 54

No comments

Elite CSW200UL Specifications Page 6